These associated minerals pose a problem in separation of ilmenite and zircon from chromite and magnetite. This study focuses on the recovery of chromite from these associated heavy …
Therefore, the main goal of this work has been to separate and to analyse the minerals contained in the raw material in order to isolate the potentially dangerous and economics minerals prior …
The ilmenite lain in ultrafine ilmenite ore cannot be treated easily. In this study, a superconducting magnetic separator (SMS) was proposed to preconcentrate the ultrafine ilmenite.
Relevant case studies for the separation of ilmenite and chromite are then presented. The process development efforts undertaken for each case are described, and the rationale for selecting appropriate magnetic separation technology is explained.
Therefore, the main goal of this work has been to separate and to analyse the minerals contained in the raw material in order to isolate the potentially dangerous and economics minerals prior to the industrial process.
There are proven and well established widely accepted techniques for concentration of chromite ores such as spiral concentration, jigs and shaking tables. However, these techniques become inefficient and complex when treating fine and ultrafine size particles (less than 75μm) resulting in this size fraction lost to the tailings.
Usually, chromite ore enrichment is carried out by using gravity separation due to high-concentration criterion between chromite and other minerals. However, chromite ore from Sukinda region, India, is a typical ore body with high iron content in the chromite spinel as well as gangue content in the form of oxide and hydroxides of iron-bearing ...
The value of the chromite ore is indeed dictated in the market by its iron, as well as its chromium content. In the present study, a chromite concentrate was reprocessed by gravity (spiral concentrator) and magnetic separation to enhance the chromium‐to‐iron ratio. ... M. Bergeron and S. F. Prest: 'Magnetic separation of ilmenite', US ...
These theoretical descriptions were verified with the pilot-scale CHGMS separator in separating fine ilmenite ore, and its performance dependence on the key parameters of the separator such as centrifugal acceleration and particle size was experimentally determined.
Spiral chute, also known as a spiral separator, is commonly used in iron ore, ilmenite, chromite, pyrite, zircon, rutile, monazite, tungsten ore, chrome, tin ore, niobium ore, and other non-ferrous metals, rare metals and non-ferrous metals, and metal ore separation.In particular, the effect of placer mining on seashores, riversides, sandy beaches, and creek …
ABSTRACT Mineral and morphological characteristics of chromite ore strongly affect the separation efficiency while upgrading the low-grade deposits. Usually, chromite ore enrichment is carried out by…
Chromite is considered a strategic mineral in the global economy. It is mainly used as an essential raw material in the production of stainless steel and other metal alloys due to its corrosion and heat resistance properties. High-grade chromite resources are gradually depleting; with the increasing chromite demand in metallurgical applications, studies have focused on …
Ilmenite concentrates from the Murray Basin deposits of southeastern Australia contain discrete grains of chrome spinels as a major impurity that must be removed for the …
Flotation, selective flocculation, as well as magnetic carrier separation studies have also been carried out for different chromite ores to separate chromite from the gangue minerals [32][33][34 ...
Comparison of magnetic separation technologies - "A discussion of magnetic separation techniques for concentrating ilmenite and chromite ores" Skip to search form Skip to main content Skip to account menu. Semantic Scholar's Logo. Search 221,637,290 papers from all fields of science. Search ...
The Cr:Fe ratio (chromium-to-iron mass ratio) of chromite affects the production of chrome-based ferroalloys. Although the literature contains numerous reports related to the magnetic separation of different minerals, limited work concerning the application of magnetic separation to fine chromite from the Sukinda region of India to enhance its Cr:Fe ratio has been reported.
provide ilmenite of higher TiO2 content, including altered ilmenite (60% - 75% TiO2), leucoxene (76% - 90% TiO2) and rutile (95% TiO2) [7]. On the other hand, in alluvial sediments, ilmenite alters and Fe is partially leached in a conti nuous process going to pseudorutile (Fe2Ti3O9) and leucoxene [8]. For that reason, titanium and iron
Chromite ore is geologically associated with gangue materials which have lower density compared to pure chromite (FeO.Cr2O3). Gravity separation techniques are very suitable for...
Chromite ore is geologically associated with gangue materials which have lower density compared to pure chromite (FeO.Cr2O3). Gravity separation techniques are very suitable for...
The ilmenite lain in ultrafine ilmenite ore cannot be treated easily. In this study, a superconducting magnetic separator (SMS) was proposed to preconcentrate the ultrafine …
This criterion of density difference between chromite and the associated minerals suggests the use of gravity separation techniques for concentrating the low-grade chromite ores. This paper presents the results of an investigation on the concentration of a low-grade (30% to 35% Cr2O3) chromite ore from Chickay Mine, East of Sudan, using a ...
Ilmenite concentrates from the Murray Basin deposits of southeastern Australia contain discrete grains of chrome spinels as a major impurity that must be removed for the ilmenite to become a...
These associated minerals pose a problem in separation of ilmenite and zircon from chromite and magnetite. This study focuses on the recovery of chromite from these associated heavy minerals. Initial analysis reveals that the raw sample contains coarse pebbles with a chromite content of 13% (8.8% Cr 2 O 3), which has been crushed to below 1 mm ...
Therefore, concentration of chromite is required. The most commonly used beneficiation methods for chromite ores are gravity separation, such as shaking table, jig, spiral, and Reichert cone. ... Dobbins, M., Domenico, J and Dunn, P., 2007. A discussion of magnetic separation techniques for concentrating ilmenite and chromite ores, The 6th ...
In the Pan–Xi region of China, about 1.2 billion tons of ilmenite, accounting for ~35% of the global titanium resources [1, 2], are distributed in vanadium-titanium magnetite ore.This ore includes two main valuable minerals, namely, ilmenite and vanadium-bearing magnetite [3].After years of technological innovation, it has been ascertained that the basic …
ative approach to separate these iron-bearing gangue minerals from the chromite. This work investigated on the application of different dry high-intensity magnetic separators.
Karagedik Chromite Concentrator of the ETI Holding Co., which is located in Fethiye (south Turkey), has been producing chromite concentrate assaying 47–48 % Cr2O3 from chromite ores containing ...
Gravity separation, flotation, high gradient magnetic separation (HGMS) and their combinations are commonly applied to separating fine-grained ilmenite. HGMS is used for industrial-scale pre-separation of low-grade fine-grained ilmenite, which can effectively remove non-magnetic minerals such as kaolin and feldspar.
ABSTRACT Mineral and morphological characteristics of chromite ore strongly affect the separation efficiency while upgrading the low-grade deposits. Usually, chromite ore …
These theoretical descriptions were verified with the pilot-scale CHGMS separator in separating fine ilmenite ore, and its performance dependence on the key parameters of the …